Productos
menu item
Prospect
Estimación rápida del potencial solar del emplazamiento fotovoltaico
menu item
Evaluate
Series temporales y datos TMY para modelización energética
menu item
Monitor
Evaluación de la producción fotovoltaica en tiempo real
menu item
Forecast
Previsión de la producción de energía solar para hasta 14 días
menu item
Analyst
Gestión de datos solares simplificada y unificada
menu item
Integraciones
Automatice la entrega de datos Solargis
Casos de uso
menu item
Selección de emplazamientos
Encuentre la ubicación adecuada para su proyecto solar
menu item
Simulación de la producción de energía
Analice los beneficios y riesgos potenciales
menu item
Optimización del diseño de plantas de generación eléctrica
Encuentre el diseño óptimo de la central eléctrica
menu item
Rendimiento real de plantas de generación eléctrica
Conozca la verdadera producción eléctrica
menu item
Predicción de generación
Obtenga predicciones de la producción de energía del proyecto solar
menu item
Verificación de datos de tierra
Verifique la calidad de las mediciones solares y meteorológicas
Evaluación de recursos solares y meteorología
Validación y evaluación detallada del recurso solar
Adaptación al sitio de modelos Solargis
Combinación de datos de satélite con mediciones de tierra
Control de calidad de mediciones solares y meteorológicas
Corrección de errores en los datos medidos en tierra
Datos SIG personalizados
Datos SIG de Solargis personalizados para sus aplicaciones
Evaluación de la producción de energía fotovoltaica
Estimación de incertidumbres de energía y datos de entrada relacionados
Evaluación del rendimiento fotovoltaico
Estimación de energía para refinanciación o adquisición de activos
Estudio de variabilidad fotovoltaica y optimización de almacenamiento
Comprensión de la variabilidad de la producción en amplias regiones geográficas
Estudio del potencial regional de energía solar
Identificación de ubicaciones para plantas de energía solar
Nuestra experiencia y conocimientos
Cómo funciona nuestra tecnología
Metodología
Cómo transformamos la ciencia en tecnología
API e integración
Cómo integrar los datos de Solargis mediante API
Guías de productos y documentación
Notas de la versión
Casos de éxito
Blog
Ebooks
Seminarios web
Publicaciones
Eventos
Mapas y datos GIS gratuitos
Mapas de rendimiento solar
Acerca de Solargis
Socios
Certificación ISO
Empleo

Esta página aún no está traducida al español. Puede verla sólo en inglés.

The performance of meteorological data is characterized by comparison with good quality ground measurements from weather stations. Bias or Mean Bias Deviation (MBD) characterizes systematic model deviations at a given site, i.e. systematic over- or underestimation: bias values will be above zero when satellite modelled values are overestimating and below zero when underestimating (in comparison to ground measurements).

A validation procedure was carried out to compare the modelled data from the Solargis database with ground-measured data from the meteorological stations available through NOAA Integrated Surface Database (ISD) network. In the comparison 11,516 stations were used and the compared data period was going from 2006 to 2015.

The validation of meteorological information provided in Solargis data deliveries are presented for three parameters: Temperature at 2 metres, Wind Speed at 10 metres and Relative Humidity. The validation statistics of these three parameters show good results in terms of accuracy: average bias close to zero and low standard deviation of bias. Aggregated results are shown in the table and individual statistics are represented in the maps below.

It should be noted that in general data from the meteorological models represent a larger area, and they are not capable of accurately representing the local microclimates, especially in mountainous and coastal zones. This also means that complex areas with lot of contrast are more prone to see higher deviations. Areas with limited availability of data from weather stations, which are used as an input for the NWP models, would be also prone to show such differences. In addition, very extreme weather phenomena cannot be estimated with high precision using modelled data.

From the validation results represented in the maps below we can see this behaviour. Places with higher bias between measured and modelled data are typically located next to mountain areas, coast places and in general areas where the landscape and microclimatic conditions changes more intensively and less gradually. Looking at the bias statistics, it is also to be noted that the deviations during night-time are usually higher, i.e. the values provided during the solar power generation hours are in general estimated with lower uncertainty.

A correct evaluation and interpretation of uncertainty is very much related to expert decision making based on the knowledge collected from the experience in working with the data. If available, the use of ground measured data next to the project site is recommended for performing site-adaptation, i.e. correlation of the data by comparing the modelled data with the ground measured data. This procedure would allow correcting these deviations and improve the accuracy of the modelled data for that specific site.

 

Validation statistics for temperature, wind speed and relative humidity data provided in Solargis. Aggregated results across the 11,516 stations.

11516 stations

Map of global all-day air temperature at 2 m bias distribution

temperature

Map of global all-day wind speed bias distribution

wind speed

Map of global all-day relative humidity bias distribution

relative humidity